Universal Testing Machine / Universal Testing Machine Equipment Manufacturer and Supplier

Universal Testing Machine

Computerized Twin Screw Universal Testing Machine to determine properties of tensile & elongation as per ASTM D 638 & compression as per ASTM D 695 with auto stop, auto reverse facility & direct display of result through 32 bit micro controller having 4 lines and 20 character display.

Specification :

Load capacity : Various different capacities can be offered up to 5000 kg.

No. of load cell : Optional One or Two.

Cross Travel : up to 1000 mm.

Facility of full scale elongation as well as extensometer gauge length elongation (OPTIONAL).

Horizontal day light : 450mm.

Speed : Variable between 1.33mm/minute to 500mm/minute.

Paint : Powder Coated.

Power Supply : 230 Volts, 50 Hz, Single Phase.


Numeric test report consisting values of Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, elongation at peak load, elongation at break load, Young's modulus, Secant modulus for flexural at selectable % strain values, Flexural Stress, Specimen width, Thickness, Gauge length, Set over travel and set over load could be viewed on the micro-controller and printout could be obtained by directly attaching a dot matrix printer to the machine.


Graphic display through microcontroller

In addition to the above reports, further values like Young's modulus, Yield stress, Yield point, Flexural stress, Flexural modulus, Standard deviation, Intermediate result and Load Vs Elongation graph could be obtained by attaching a printer to the PC.

Send Enquiry

Polymer Testing Equipments Manufacturer and Supplier.